The classic Chevin A-Series amplifier is built in a steel and aluminium housing incorporating lateral Mosfets and the Chevin Power Supply. This combination produces the traditional Chevin sound.

Technical specification

• RMS power output
• into 8Ω (per channel)  750 W
• into 4Ω (per channel)  1500 W
• Number of channels  2
• Power bandwidth +0db, -3db  2 Hz – 80 kHz
• Slew rate in excess of  60 V / μS
• Gain x 70
• Total harmonic distortion
• typical @ 1db below clip  0,04 %
• 20 kHz @ 1db below clip  0,07 %
• Signal to noise ratio
• typical reference full output, unweighted  -125 dB
• Worst case 10 Hz – 30 kHz  -95 dB
• Crosstalk typical  -115 dB
• Damping factor  400
• Input impedance electronically balanced 10 kΩ
• Common mode recetion (typical)  -70 dB
• Input sensitivity
• Reference full output into 4 Ω 1V RMS
• Protection
• Clipping, load below 2.4  soft, dynamic linear
• shorted output, DC or RF at output  immediate 
• Power consumption
• 1/3 Power typical Program  1,3 kVA
• 50/60 Hz AC in Volts  220 – 240 V
• Internally selectable for  100 – 120 V
• Dimensions/weight
• height x width x depth (mm) / rack units  88 x 483 x 381 / 2U
• Net weight  12,4 kg